I have searched here and found two topics but no solution, only people asking why you want to delete it.
We have nightbot and moobot in this channel, moobot gives 3 mins with !permit and nightbot gives 60 seconds. When we use the !permit command both nighbot and moobot respond, so we would like to remove the nightbot command.
I tried using !command delete !permit in channel, that didn’t work.
Help? 
Thanks!
I dont think you can, however you can overwrite it and make it owner only:
OK, that’s great, thanks alot, I’ll do that.
Sorry to ressurrect this, although it’s within the 14 days! 
So this worked in that when people get timed out for bad links now, at least only moobot responds.
However, when using !permit command in chat, Moobot is overwritten by Nightbot, which I didn’t want, just because the timer is far less.
Here’s a screenshot of the current !permit command in Nightbot https://gyazo.com/7e5b318e19a16b5435f31bf120f0b4cb
Can you confirm I did it correct? And if so, how can I overwrite so that Moobot responds to !permit and not Nightbot?
Many thanks again!
Nope, you use -ul= to set the userlevel if you edit/add a command through the chat, in the backend you can just use the dropdown userlevel, change this to owner and set message to what ever you want.
OK! thanks very much.
So I changed it, using the dropdown box to Owner. Then it wanted me to put text in the message box before it would accept it, I just put n/a.
Tried it out and Moobot is back, but also Nightbot, so it’s not worked 
Any idea what I might have done wrong?
Thanks again!
Since it’s owner only Nightbot will only reply if you (the broadcaster) use it, but it wont reply to other mods who !permit your viewers.
I’m not the owner though, just a mod: https://gyazo.com/0ed19f90eeafc5ac8a0082c042d3c616
And this is the command: https://gyazo.com/b30b655f5b2104ee7afae6a0ec23cd0a
I must be doing something wrong?
Hmm, I thought that would work but just tested that and indeed it doesn’t overwrite it. Hopefully one of the Nightdev team can give you an other solution.
I see, that’s a shame. Hopefully someone can help though.
Thanks very much xgerhard, you’ev been very helpful.
This should be fixed.
I mean, I tested it after deploy and it does indeed work. Custom commands override it.
OK, I don’t understand then, what am I doing wrong?
This is the permit command https://gyazo.com/8fcfb7d881699f15325da54f1663f22e
And again, I just used permit, and I’m mod, not owner: https://gyazo.com/940db4c61853ff83b87a36c54d79cd67
Any help would be appreciated, thanks guys!
If you disable link protection from Nightbot, it should also now disable the command.
If you mean this: https://gyazo.com/8411837ea95ebbb38129d3fc4171cc52
Then yes, it’s already done.
Anything else? and thanks!
If you’ve done that, then the issue is fixed as of my last post.
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
